EN-14 Valor™ 7000
Series
4.3 Setup Menu
Enter this menu to set scale parameters. Default settings are
bold
.
Reset
[
reset
]
Reset the Setup menu to factory defaults.
NO
= not reset
YES = reset
Power on unit
[
pwWr.UN
]
Set the unit of measure displayed at startup.
AUTO = last unit in use when turned off
kg
= kilograms
g
= grams
lb
= pounds
oz
= ounces
lb:oz = pound ounces
Zero Range
[
ZErO
]
Set the percentage of scale capacity that may be zeroed.
2%
= zero up to 2 percent of capacity
10% = zero up to 10 percent of capacity
Auto Tare
[
A.tArE
]
Set the automatic tare functionality.
OFF
= Automatic Tare is disabled
ON
= the first stable gross weight is tared
ON-ACC = stable gross loads within the accept limits are tared (in Check weighing mode)
Beeper Signal
[
Bp.sIG
]
Set how the beeper responds in Check Weighing mode.
OFF
= the beeper is disabled
ACCEPT = the beeper will sound when the weight is within the Accept range.
UNDER = the beeper will sound when the weight is below the Under setting.
OVER = the beeper will sound when the weight is above the Over setting.
OVER- = the beeper will sound when the weight is below the Under setting or above the
UNDER Over setting.
Beeper Key
[
BP.key
]
Set whether the beeper sounds when a button is pressed.
OFF
= no sound
ON
= sound
Reset:
no
, yes
Power On Unit:
auto
, kg, g, lb, oz, lb:oz
Zero Range:
2%,
10%
Auto Tare:
off
, on, on-acc
Beeper Signal:
off
, accept, under, over, under-over
Beeper Key:
off
, on
IR Func:
disp
, zero, func, tare, print
IR Adjust:
off, low,
high
Accumulation: off, auto,
manual
End Setup:
Exit menu
Summary of Contents for V71P3T-M
Page 1: ...Valor 7000 Series Instruction Manual...
Page 2: ......
