8
2.1 Trouble Shooting
Problems
Possible Reasons
Solutions
Both pressure
value and
temperature value
of all tyres are
"000" shown on the
display
Problems of antenna
connection
Check antenna connection
The antenna is broken (all
transmitters are well)
Replace antenna
There is something wrong
with display
Use a pair of transmitter & ID module
and TPMS Smart Tool to confirm. If it
doesn’t work, replace it
The pressure and
temperature values
are ”000” at one or
more transmitter
locations
(After start the
display)
Problem of transmitter
Use TPMS Smart Tool to check it
Problems of ID module
Pull out the ID module and re-plug in,
then restart the display.
If problem still exist, do next step
Pull out the ID module and plug in other
ID module seat, then restart the display.
If problem still exist, replace the ID
module.
The pressure value
is “000”, but
temperature value
is normal.
Air hole of transmitter is
air-logged
Replace the transmitter
No values shown
on the display
and all icon
indicators don’t
shine
Display is turned off
Turn on switch on the back of display
Power cord is not properly
installed
Check power cord connection
The display is burnt out
Replace display
No values shown
on the display, but
icon indicator
shines
Without ID module in the seat
Plug in ID module
Dash “- - -”shows
on the display
(When the data
transmission was
interrupted)
System failure
Restart the system
Surrounding interference
Leave the surrounding
Problem of transmitter
Use TPMS Smart Tool to check it
Problems of ID module
Pull out the ID module and re-plug in,
then restart the system. If problem still
exist, do next step.
Pull out the ID module and plug in other ID
module seat, then restart the system. If
problem still exist, replace the ID module.
All data does not
refresh
System failure
Restart the system and run your vehicle
The display
continues to