4000829/05
6
2. FRAMING KIT ASSEMBLY
•
Locate legs brackets to sides of engine and secure with 4 #8 screws; locate and secure rear support (fig 3).
•
Secure duct to leg framing using 2 screw holes located through rear of leg (fig 4).
•
Position shield on top of duct and secure with 2 #8 screws. (fig 5).
•
Note: Shield can be placed in two positions dependant on which StoneFire mantel is being installed (fig 5).
•
Locate and secure stand-offs to rear corners of engine (fig 5a).
•
Place engine into cavity and secure to framing (fig 1-2).
•
Position top cover onto legs and secure to framing (fig 5).
•
After installation of mantel, locate and secure removable frame assembly (fig 6).
Fig 3, Legs & Back Support fixing points
Fig 4, Duct fixing points
Fig 5, Shield and top cover setting
Fig 5a, Fixing Stand-offs to rear of engine
