Valor Retrofire RF24XBN, Installation And Owner'S Manual

Page: 10 / 30

10
OWNER’S
INFORMATION
Remote Control Operation
CAUTION
DO NOT USE a screwdriver or other metallic object to
remove the batteries from the receiver or the handset!
This could cause a short circuit to the receiver.
Options
Fuel
RF24BN —Natural Gas Installations
RF24BP —Propane Gas Installations
Accessories (sold separately)
Decorative Cast Iron Frets
RA24CV —Contemporary, Vintage Iron Finish
RA24AV —Avant-Garde, Vintage Iron Finish
RA24TB —Traditional, Black Finish
1225VFB— Ventana Fret, Black Finish
Venting
Pipe—Generic 3” dia. fl exible aluminum liner approved
for gas venting into existing fi replace and chimneys or
4” dia. type “B” vent with zero clearance kit option.
Circulating Fan
555CFK —Circulating Fan Kit, thermally actuated,
variable Speed, with 6’–0” c/w grounded cordset.
Conversion Kits
RA24NK —Converts from LPG to NG
RA24PK— Converts from NG to LPG
Zero Clearance Kit
RA24ZC
Outer Cast Plate
715CVI (use with RA24ZC kit only)
Screened Fronts (use with RA24ZC kit only)
RA24DS —Draw Screen
RA24FS — Fixed Screen
743FVI — Double Door FenderFire
744FVI — Single Door FenderFire
Hearth Gate (optional)
Hearth gates such as Cardinal’s VersaGates are
available at retail stores carrying safety products
for children.
Battery Replacement
When your remote control displays BATT , you need to replace the battery with a
new 9 volt alkaline battery—6LR61/MN1604.