Valor PORTRAIT 530IN Homeowner'S Manual Download Page 1

WARNING: 

FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings 

exactly could result in serious 

injury, death, or property damage

.

Do not store or use gasoline or other 

fl

 ammable vapors and liquids in the 

vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance.

Do not touch any electrical switch; do 

not use any phone in your building.

Leave the building immediately.

Immediately call your gas supplier from 

a neighbor’s phone. Follow the gas 

supplier’s instructions.

If you cannot reach your gas supplier, 

call the 

fi

 re department.

Installation and service must be 

performed by a quali

fi

 ed installer, service 

agency or the gas supplier.

Hot glass 

will cause burns.
Do not touch glass 

until cooled.
Never allow children 

to touch glass.

A barrier designed to reduce 

the risk of burns from the hot 

viewing glass is provided with this 

appliance and must be installed for 

the protection of children and 

other at-risk individuals.

DANGER

4009340-02

Homeowner’s Manual

Direct Vent Gas Fireplaces

Zero Clearance

natural gas    530IN 

propane gas   530IP
Insert ONLY

natural gas    530INI 

propane gas   530IPI

PORTRAIT

Summary of Contents for PORTRAIT 530IN

























Reviews: