HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS.
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and must be
installed for the protection of children and other at-risk
individuals.
The 2530 Clean Installation Kit installs at the time of
framing the appliance. Wall
fi
nishes are then applied
and butted directly up to the outer frame.
Depth
1-1/4”
[31.75 mm]
20
-1
3/
16
”
[53
0 mm
]
41” [1042 mm]
7-
15
/1
6”
[2
01
m
m
]
Left hand
door
Cover
plate
2500K engine
Note: This kit must be
installed or serviced by a
qualified installer, service
agency or gas supplier. These
instructions are to be used
in conjunction with the main
installation instructions
for the above listed heater
model.
INSTALLER: Leave this
manual with the appliance.
CONSUMER: Retain this
manual for future reference.
This kit is not intended to and
cannot be installed with
any other trim.
See appliance installation manual for more
information about finishing around this kit.
Right
hand door
CIK assembly
Barrier
screen
Overview
Dimensions
2530CIK Clean Install Kit
Use with
Valor LT1 2500 Heater Models ONLY
(series K or later)
INSTALLATION MANUAL
LT1 Series
4009376-01
©2022, Miles Industries Ltd.