Front view,
left side
Top view, left side
Flex connector redirected using one elbow.
Flex connector redirected using two elbows.
Common
fi
ttings required (not supplied)
3/8” elbow
+ short 3/8”
nipple
OR
3/8” street
elbow(s)
(where al-
lowed)
1. Remove
fl
ex connector.
2. Remove
fl
ared connector.
3. Install new inlet elbow.
4. Add
fl
ared connector to new
elbow and
fi
t
fl
ex connector.
Close the access panel.
Alternate Inlet Connection
In cases where local codes do not permit the
fl
ex
connector to be used inside the appliance case,
reconnect the
fl
ex connector outside of the appliance
case. A cut-out is provided in the appliance case for
this purpose.
Cut-out
Option 1
Option 2
4. Add another elbow, the
fl
ared
connector and re
fi
t the
fl
ex
connector. Direct it towards
the rear of the appliance or
downward.
Close the access panel.
Supply Gas Installation
Use common elbow and
fi
ttings (not
supplied) to redirect the position of
the
fl
ex connector. NOTE: the
fl
ex
connector bend radius must be no
smaller than the size of a golf ball
(approx. 1-3/4” or 44 mm).
16
INSTALLATION
