Options
Venting (required)
See
Approved Venting Components
section.
Inner Front (required)
See your dealer for your choice of Inner Fronts.
Outer Surrounds, Trims & Frets (optional)
See your dealer for your choice of Outer Surrounds
and Trims and Frets.
Optional Accessories
755CFK—Fan Kit
1265WSK—Wall Switch Control Kit
759EBL—Enamel Liners
754RSK—Rock Set Kit
760CBL—Ceramic Black Fluted Liners
771RGK—Rock & Glass Kit (for 739IR only)
Conversion Kit (optional)
739PGK—Conversion Kit to Propane Gas
739NGK—Conversion Kit to Natural Gas
Hearth Gate (optional)
Hearth gates such as Cardinal’s VersaGates are
available at retail stores carrying safety products
for children.
Remote Control Operation
AUTOMATIC TURN DOWN
AUTOMATIC SHUT OFF
LOW BATTERY INDICATION
HANDSET / RECEIVER MATCH
Remote handset:
The battery icon will show
when the battery needs to be replaced.
Replace with one 9 V
alkaline
battery.
Receiver:
Three short ‘beeps’ will sound when the
motor turns when the batteries need to be replaced.
Replace with four 1.5 V
alkaline
batteries.
The remote control handset and receiver are program-
med to function together. In case of a replacement of
the handset or the receiver, you will need to reset the
receiver to allow them to function together. Contact your
dealer for details.
•
No communication.
If there is no communication
between the receiver and the handset for a period of
6 hours, the appliance goes into pilot mode.
•
No change in fl ame height.
If there is no change
in
fl
ame height for a period of 6 hours, the appliance
goes into pilot mode.
NOTE:
In
TEMP
or
TIMER
modes, the
fl
ame height
will vary according to room temperature. The appli-
ance will continue to work normally. However, if the
room temperature remains the same for 6 hours, the
appliance will go into pilot mode.
•
Low batteries in the receiver.
With low battery
power in the receiver the system shuts off
completely.
NOTE:
This does not apply when the power supply
is interrupted.
•
No change in pilot.
The appliance shuts off
completely when it is continually in pilot position—
without any change—for a period of 5 days.
Timer Programming Example
(default temperatures shown)
6:00 a.m.—
P
1
Start time
4:00 p.m.—
P
2
Start time
6:00 a.m.—
P
1
Start time
8:00 a.m.—
P
1
End time
10:00 p.m.—
P
2
End time
Set temp 74
˚
F
Set temp 40
˚
F
Set temp 74
˚
F
Set temp 40
˚
F
☼
☼
☼
☼
☼
☽
☽
☽
☽
CAUTION
DO NOT USE
a screwdriver or other metallic object
to remove the batteries from the battery box or the
handset! This could cause a short circuit.
13
OWNER’S
INFORMATION
