43
Decorative Glass Murano 1700DGM
Material required
• Steel platform (supplied with appliance)
• Decorative Glass Murano Glass kit, which contains:
• 1 bag of clear 1/2”
fi
reglass
• 8-pieces glass platform
Installation
Carefully unpack the kit.
1. Install the steel platform around the burner as
indicated. The openings in the platform should be
underneath.
2. Install the glass plates on the platform, textured side
underneath and smooth side on top. Follow the dia-
gram below as the pieces are not all the same size.
3. Carefully spread the
fi
reglass by hand, on the sur-
face of burner forming a single layer to the approxi-
mate level of the top edge of the
fl
ange around the
burner. Do not pour from the bag and do not pour
too much to avoid blocking the burner ports.
4. Some
fi
reglass may be added on the platform to
cover the edge of the burner and in the space in
front and behind the pilot shield.
NOTE:
Ensure the area
within
the pilot shield is clear
of
fi
reglass.
IMPORTANT:
Approved for use only with the
fi
reglass
provided with your Valor
fi
replace or the tempered
crushed
fi
reglass brands
American Fireglass™
or
fi
regear
. The use of any other
fi
reglass products may
void your
fi
replace warranty.
Pilot shield
Installation
Fuel Beds
WARNING
Choking Hazard! Ensure that the fireplace
area is clear of fireglass particles as these
could be ingested by small children.
Vacuum area after installation.
Installed glass plates
narrower glass plates at the back
wider glass plates at the front
Top view—glass plates
longer glass plates
in the middle
pilot area
narrower
wider
Installed platform