2
Installation
1. On completion of fireplace installation, fit the con-
vection baffle to top face of firebox with 3 screws.
2. Carefully position and secure backing plate with 4
low profile screws to 4 firebox mounting brackets;
before tightening, hold plate up against wall finish
then tighten.
3. Slide the removable panel in the clip on the
horizontal supports on each side and push it in until
flush with the front trim.
4. Adjust the position of the convection brackets on
each side of the window. Release the nut, pull the
bracket as forward as possible and tighten the nut.
5. Identify left hand door from right using diagram
below.
LH Door
RH Door
finger grip inboard,
with locator on right
finger grip inboard,
with locator on left
Bottom of
locator tabs
have hook