9
Fronts and Trims
For fronts and trims dimensions, refer to instructions
provided with each kit.
Floor/Hearth
This appliance is approved for installation directly on
combustible material such as plywood and so on. Vinyl,
carpet, and soft
fl
ooring require sheet metal extending
the whole width and depth under the appliance.
This appliance does not require a hearth. Combustible
fl
ooring may extend up to the front of the unit.
Corner Installation
Location
46” (1168 mm) min.
46”
(1168 mm) min.
65”
(1651 mm) min.
clearance to
combustible
at rear
MINIMUM 3/4” (19 mm)
NOTE
The surround backing plates for this appliance
require a MINIMUM space of 1/2” (13 mm)
between their bottom edge and the surface of
the finished floor/hearth in front for air flow.
Raise the appliance accordingly.