2
Hardware Requirements
Required Components
To use the Valor 10 app and run the fireplace on a WiFi
system, the following components are required:
•
WiFi module (and receiver cable)
•
Maxitrol model B6R-W2ZV-0 (check label)
•
Receiver
•
Maxitrol model B6R-RAP (check label)
•
V-Module (and receiver and power cables)
•
Maxitrol model G6R-BUMV3 (check label)
Model number
Model number
Model number
•
Valor 10 Remote Handset (and holder)
•
Battery holder (and receiver cable)
See "Part Numbers" on page 4 for full details.
Available Kits
GV60WIFI:
This kit is suitable only for LX1 and LX2
fireplaces manufactured after July 2019, or other
installations that have all required components except
the WiFi module. This kit includes:
•
(1) WiFi module and connector cable
GV60WIFI2:
This kit is
required
for any installation that
does not include all the required components. This kit
includes:
•
(1) WiFi module (B6R-W2) and cable
•
(1) Receiver (B6R-R9P)
•
(1) V-Module (G6R-BUMV3) and cables
•
(1) Valor 10 Remote Handset and wall holder
•
(1) Battery holder and cable
Note:
If you are unsure of whether the
equipment in your installation meets requirements,
please contact your local Valor dealer:
valorfireplaces.com/contact/
