Valor equinox 754 Owner'S Manual Download Page 14

MAINTENANCE

Regular maintenance

In order to achieve and maintain high levels of personal safety and performance
efficiency, it is essential that the opening at the back of the fire and the flue are kept
clear of any form of obstruction. It is possible that deposits of mortar or soot could fall
and accumulate causing the flue to be blocked or restricted and so preventing proper
clearance of dangerous exhaust fumes.
In the United Kingdom it is the law that a landlord must have any gas appliance, flue
and pipework which is situated in a tenant’s premises checked for safety at least every
twelve months by a competent person (In the U.K, a CORGI registered installer).
We recommend that all gas appliances and their flues, wherever situated, are checked
annually. 

Servicing

If you require your fire to be serviced, please contact British Gas or Scottish Gas

TELEPHONE 0845 950 0400 

and please quote the following details which can be

found on a ‘swing’ plate located below the burner behind the bottom hearth casting

a) Your Post Code.
b) Type of  fire and front and colour
c) Model/Name.
d) Serial Number (To be found on a ‘swing’ plate located below the burner and 

behind the lower front cover). 

e)  The fault, problem or request.

If you wish to replace any of the owner replaceable parts listed below, please quote

the following part numbers.

Description

Part No.

Front Base pebble               

5108545

Rear Base pebble               

5108546

Pack of 17 Loose Pebbles 

3002802

Set of 4 ceramic support rods

3002478

When fitting replacement parts, follow the instructions contained in this guide. It is 

important that only approved parts are used for maximum safety.

Page 14

OWNER GUIDE

To help us quickly help you, please try to have the following information available

before you contact us:

Summary of Contents for equinox 754















Reviews: