4.
There are two pebbles
numbered‘5’. They have a
central location peg on the
underside. Locate the first
pebble ‘5’ centrally between the
left hand ceramic support rods
(See figure 8). Locate the
second pebble ‘5’ centrally
between the right hand ceramic
support rods (See figure 8).
They will now be positioned
directly above the burner
ports
5.
Pebble ‘3’ has a location
peg on the underside. The
peg has a chamfer on one
side. The chamfer must face
the burner. Locate pebble
‘3’ onto the left hand side of
the pebble base. It should
bridge the gap between the
front and rear halves of the
pebble base.
The location peg
on pebble ‘3’ should not cover
the burner ports.
Pebble
‘3’should be as far to the left
hand side as possible.(Figure 9).
6.
Pebble ‘4’ has a location peg
on the underside. The peg has a
chamfer on one side. The
chamfer must face the burner.
Locate pebble ‘4’ onto the right
hand side of the pebble base. It should bridge the gap between the front and rear halves
of the pebble base.
The location peg on pebble ‘4’ should not cover the burner ports.
Pebble ‘4’ should be as far to the Right hand side as possible.(See figure 10).
Page 12
OWNER GUIDE
Figure 10. Pebble number ‘4’ location
Figure 9. Pebble number ‘3’ location
Figure 8. Pebble number ‘5’ location
