OWNER’S GUIDE
Page 10
Figure 6. Front Base Coal
Position
Figure 5. Rear Base Coal
Position
Figure 4. Ceramic Rear Wall
Position
REFITTING THE CERAMICS
1.
Fit the ceramic rear wall into the bracket at
the back of the firebox .See figure 4.
2.
Place the rear base coal in the firebox. It
should rest on the ledges at the sides and back of
the firebox and its rear face should touch the rear
ceramic wall. See figure 5.
3.
Place the front base coal in the firebox with
its bottom front locating over the front rim of the
firebox. Pull the coal forward so that it locates
immediately behind the front rim of the
firebox. See figure 6.
There are two types of loose coals. These are
identified with the letter “A” or “B” on the
underside of the coal.
There are three “A” coals and two “B” coals.
