27
Programmable Remote Control
Your
fi
replace remote control helps you get the comfort, convenience and aesthetics you want from
your gas
fi
replace. The remote controls your
fi
replace in different ways.
IMPORTANT:
BEFORE YOU BEGIN, please note that on this system, the settings of time, temperature
and automatic ON/OFF can only be programmed when the function display is fl ashing. Be patient
when programming as it can take a few seconds to set.
Setting the time
The
fi
rst thing to do is to set the time.
With your thumb, hold down
both
the
AUTO
and
TIMER
buttons until
F
fl
ashes. Let go.
Note the digital clock on the bottom right hand corner. The
▲
button sets
the hour; the
▼
button sets the minutes. Set the time.
Note: You must start setting the time while the
F
is
fl
ashing. If it stops
fl
ashing, go back to 1.
The display shows °C/24-hour or °F/12-hour. To change the temperature/
hour display, press on the
AUTO
button while the display
fl
ashes.
Let go and wait until the
fl
ashing stops. The remote shows the time you
set. It also shows the current temperature.
Setting the temperature
Use this setting when you come in and want to enjoy a speci
fi
c temperature.
Push the
AUTO
button until a number and
F
fl
ash. Let go.
While it is still
fl
ashing, push the
▲
and
▼
buttons to the temperature
you want. Let go.
Your
fi
replace will reach that temperature and the remote will check the
temperature every
fi
ve minutes, adjusting the amount of fuel needed to give
you a steady, even heat.
1.
2.
3.
4.
1.
2.
f i r e - p a r t s . c o m
