Valor 700 Operating Instructions Manual Download Page 3

3

SETTING THE TIME

SETTING ºC/24-HOUR OR ºF/12-HOUR CLOCK

MODES OF OPERATION

NOTE: 

Manual mode can also be reached by pressing 

either the      (large 

 ame) or the     (small 

 ame) buttons.

•• 

Press and hold      (small 

 ame) 

button to decrease 

 ame height or 

to set the appliance at pilot 

 ame.

•• 

For 

 ne adjustment tap the       

(large 

 ame) or     (small 

 ame) 

buttons.

•• 

Brie

 y pressing the SET button 

changes the mode of operation in 
the following order:
           

ĺ

               

ĺ

      

ĺ

             

ĺ

                

ĺ

            

ĺ

 and back 

to           .

•• 

Double-click      (small 

 ame) 

button. ““LO”” will be displayed.
NOTE: Flame goes to high 

 re 

 rst 

before going to designated low 

 re.

•• 

In MAN mode, press OFF and          
(small 

 ame) buttons until display 

changes from Farenheit/12-hour 
clock to Celsius/24-hour clock and 
vice versa.

•• 

The time display will 

 ash after 

either:

•• 

Installing the battery or

•• 

Simultaneously pressing the 

(large 

 ame) and      (small 

 ame) 

buttons.

•• 

Press        (large 

 ame) button to 

set the hour.

•• 

Press        (small 

 ame) button to 

set the minute.

•• 

Press OFF or simply wait to return 
to MAN mode.

•• 

Double-click      (large 

 ame) 

button. Flame automatically goes 
to high 

 re. ““HI”” will be displayed.

•• 

           - Manual Mode - 

Manual 

Flame Height Adjustment.

Express Low and High Fire

•• 

               - Daytime Tempera-
ture Mode 

(Appliance must be in 

standby mode; pilot ignited) 

The 

room temperature is measured and 
compared to the set temperature. 
The 

 ame height is then auto-

matically adjusted to achieve the 
Daytime Set Temperature.

•• 

           - Fan Mode

 

Turns fan ON 

and OFF and adjusts fan speed.

NOTE: 

To turn OFF fan press       

(small 

 ame) until all 4 

speed level bars disap-
pear.

•• 

      - Light/Dimmer Setting Mode  

Not available on this 

 replace.

x 2

x 2

MAN

MAN

MAN

TEMP

TEMP

TEMP

TIMER

Summary of Contents for 700








Reviews: