15
Cleaning your fireplace
Window frame
Bottom railing
To re
fi
t the window:
1. Place the window in its bottom railing.
Ensure to
remove any vermiculite or glass particles in the
railing before installing the window.
2. Push the top of the window frame against the
fi
rebox.
3. While you hold it, pull the side levers back into the
window brackets on each side.
4. Apply
fi
rm hand pressure around the window
frame to ensure the window is sealed tight against
the
fi
rebox.
5. Pull out the top of the window and release it to
ensure the springs return it.
WARNING
The window unit must be correctly
installed, fastened and sealed after
servicing or serious bodily injury and/or
damage to the appliance may result.
To ensure a safe operation:
• Double-check that the bottom of the
window frame is correctly installed in
the bottom support railing;
• Verify that the levers are hooked
properly to the window tabs then;
• Pull out the top of the window and
release it to insure the springs return it;
• Ensure the window is sealed before
operation.
WARNING
Failure to install the window correctly
can:
• Leak carbon monoxide.
• Affect the performance of the fireplace.
• Damage components.
• Cause overheating resulting in
dangerous
conditions.
Damage caused by incorrect window
installation is not covered by the Valor
Warranty.
Summary of Contents for 1500KN
Page 32: ...32 Notes ...