4004907-04
© Copyright Miles Industries Ltd., 2016.
1430FFK Fixed Framing Kit
Installation Instructions
CSA approved for use with
Valor Model 1400 Heaters ONLY
Note:
This kit must be installed
by a qualifi ed installer, service
agency or gas supplier
at the
time of the heater installation.
These instructions are to be used
in conjunction with the fi replace
main installation instructions.
INSTALLER
Leave this manual
with the appliance.
CONSUMER
Retain this manual
for future reference.
The 1430FFK Fixed Framing Kit installs to the Valor
1400 appliance during the framing stage and the
appliance’s position is fi xed in the framing. Wall fi nishes
are then applied over top of the fl anges and butted up
to the frame of the 1430.
This kit is not intended and
cannot be installed with
an H6 trim or any other trim
.
See appliance installation manual for more
information about fi nishing around this kit.
Overview
1400 engine
Upper panel
LH panel
RH panel
Stand-off
Stand-off
Lower panel
RH door
LH door
Removable panel
Barrier screen
45-5/8” (1158 mm)
41-3/4” (1061 mm)
39”
(991 mm)
33”
(839 mm)
1-1/8”
(29 mm)
H6 S
ERIES
HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS.
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
