33
Installation Planning
Installer—READ THIS FIRST
1. YOU NEED TO KNOW FROM THE
HOMEOWNER:
- The height of the fl oor or hearth fi nish;
- The thickness and type of the wall fi nish
around the fi rebox opening;
- What accessories (surround, door, etc.) will
be installed with this fi replace if any;
- The venting confi guration.
2. Unpack the appliance.
3. Check that you have everything.
4. Finish
framing.
5. Fit appliance into framing.
6. Remove overlay and
fi
x the appliance to the
fl
oor.
7. Reinstall the overlay.
8. Install venting system.
9. Install
restrictor.
10. Connect and test gas supply.
11. Install bricks and logs.
12. Re
fi
t window.
13. Connect electrical wiring for decorative light.
14. Install optional wall switch if required.
15. Put batteries in receiver and remote control
handset.
16. Perform initial remote control set-up.
17. Verify operation and adjust aeration settings.
18. Install the remote control handset wall holder.
19. Instruct the homeowner on the operation and
maintenance of the fi replace.
20. Install the window skirt.
21. Install the control access doors.
22. Install the andirons and fret if required.
23. Finish the wall around the
fi
replace.
24. Install the surround/doors/mantel if required.
10”
10”
3” Inlet & Exhaust
Collars
7-5/8” dia.
collar
559FSK Flashing Kit
559CLT Co-Linear Terminal
Alternate to 559CLT/559FSK Conversion
Terminal Cap
Co-Linear to Co-Axial
Adapter
Co-Linear Venting
Flashing
Co-linear terminal confi gurations
Only qualifi ed licensed or trained personnel
should install this appliance.
QUALIFIED
INSTALLER
Summary of Contents for 1200EAN (NG)
Page 52: ......
