6. FITTING THE FASCIA
Fitting the Dream fascia.
1.
Remove the fascia from its packaging.
2.
Hold the fascia firmly and lift into place
.
Locate the fascia hanging brackets into
those on top of the firefront (See figure 9).
Lower the fascia into place and swing the
bottom of the fascia towards the firefront.
3.
Secure the fascia through the holes in
the lower side legs of the fascia using two
washers and two
M4 x 25mm
screws
supplied (See figure 3).
4.
Place the lower casting in place.
Position the ash pan cover beneath the
lower casting.
Fitting the Classica fascia.
1.
Remove the fascia from its
packaging.
2.
There are two magnets on the
lower raised areas of the fascia (See
figure 10).
Ensure that they are
located correctly before fitting the
fascia.
3.
Supplied with the fascia is a black
decorative moulding. Remove the
two screws from the rear of the
fascia (See figure 10), locate the
moulding and secure using the two
screws removed previously.
4.
Hold the fascia firmly and lift into
place
.
Keeping the magnets away
from the body of the firefront, locate
the fascia hanging brackets into
those on top of the firefront (See
figure 10). Lower the fascia into place and swing the bottom of the fascia towards the
firefront to engage the magnets.
INSTALLER GUIDE
Page 14
©
Baxi Heating U.K. Limited 2009.
Figure 9. Fitting the Dream fascia
Figure 10. Fitting the Classica fascia