Do I need any tools?
You will need a Pozidrive / Phillips / cross head screwdriver. This should have a
number 2 size tip.
Where and how can you fit the firefront?
Q
What opening size do you need in the surround or fireplace opening?
A
This firefront can be fitted into fireplaces or surrounds where the following
dimensions are available.
Model
Classica, Dream and Innova
Regalia
Width
390mm - 490 mm
390mm - 490 mm
Height
560mm - 595 mm
560mm - 575 mm
Depth
At least 95mm
At least 95mm
Q
Can the firefront be installed into a ‘hole in the wall’ (elevated opening)?
A
We do not recommend the firefront for this type of installation.
Q
Do you want to fit the firefront into a surround or fireplace opening without
the optional spacer frame?
A
The minimum rebate / depth required is
95mm.
Q
Do you want to fit the firefront into a surround using the optional spacer
frame?
A
The minimum rebate required is 45mm.
Q
Do you want to fit the firefront against a flat wall with the base of the
firefront on a hearth or similar surface?
A
You will need to purchase two optional spacer frame kits - See section 3
.
These
spacers when added to the one supplied with the firefront enable the firefront to
be flat wall fixed.
The depth of the combined spacer frames is 150mm.
General notes to read before fitting your firefront.
Ensure that the boiler has been commissioned and the benchmark checklist in
the boiler installation guide completed.
There should be at least 50mm clearance between the top of the fascia and anything
such as a shelf, fireplace surround or mantel etc. This will allow the fascia to be lifted
off or removed during servicing. To check the shelf clearance gently place the fascia
against the surface to which it is to be fixed and measure the distance from the top of
the fascia.
INSTALLER GUIDE
Page 10
©
Baxi Heating U.K. Limited 2009.