Remote Control
What do the buttons control?
Press red ‘ON’ button.
To activate the remote handset it is necessary to press the red ON button.
Press effect button.
Pressing and holding the button in will vary the brightness of the flame effect.
The brightness of the flame effect will always return to preset level when the heater has
been switched off.
Pressing and releasing the effect button for a second time will turn the effect off.
Press the ‘Heat 1’ button.
This turns the flame effect and 1kW heater on. Both the status lamp and temperature
lamp turn amber.
The thermostat will maintain the room temperature to an average of approximately 22°.
Press ‘Heat 2 / Temp Setting’ button. (This is an ideal setting for quickly warming
a cold room)
This turns the flame effect and 2kW heater on. The status lamp turns red and the
temperature lamp turns amber.
Pressing and holding the button will adjust the temperature range and temperature lamp
as below:
Temperature lamp colour
Temperature range
Average temperature
Green
Low
16° max
Amber
Medium
22° max
Red
High
35º max
Press red button
.
Turns heater Off.
Page 9
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2007.
All manuals and user guides at all-guides.com
