Important Electrical Safety
The stove must
not
be located in front of or under an electrical socket, the socket must
always be accessible in order to disconnect the stove from the electrical supply for
maintenance and cleaning.
Important! This stove must be earthed.
!
The stove is supplied with a 3 pin 13 Amp fused re-wireable plug with 1mm² 3 core
cable.
!
The wires in the cable are coloured in accordance with the following code: -
Live =Brown
Neutral = Blue
Earth = Green /Yellow
!
The electric supply must be safely routed from the stove to an electrical socket.
If the electric cable is damaged, to avoid a hazard it must be replaced by a Valor Fires
authorised service agent, or similarly qualified person (See page 12-14). All external
wiring between the stove and the electrical supply shall comply with current IEE
regulations.
Fitting the legs.
The stove is supplied with the four legs removed in order
to prevent damage during transportation. Each leg has
raised lugs that locate into holes in the base of the stove
(See figure 2). Locate the legs and secure in place using
the screws supplied.
Page 6
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2007.
Figure 2. Fitting the doors
All manuals and user guides at all-guides.com
all-guides.com
