To replace the lamp.
!
We recommend that the floor is protected with a suitable covering to prevent
staining or discolouration by the coals.
!
Open the door.
!
Remove all of the loose coal pieces from the top and front of the fuel support. Be
careful not to place the coal pieces onto decorative surfaces as they may cause
staining or discolouration.
!
Move the fuel bed forward and upward out of the way; you may have to hold the
fuel effect up whilst replacing the lamp.
!
Remove the faulty lamp.
!
Fit the new lamp.
!
Relocate the fuel effect.
!
Place the loose coal pieces on top and in front of the plastic fuel bed.
!
Close the stove door.
2. My stove is switched on but there is no light, fan or heat.
The first thing to do is check the wall socket. To do this plug in a known working
appliance. If the appliance you have plugged in works then there is a good chance
that the problem lies with the 13 Amp fuse in the stove plug. If either fuse or socket is
suspected, have them checked by an electrician.
3. My stove is on but there is no heat.
The first thing to do is check the wall socket. To do this plug in a known working
appliance. If the appliance you have plugged in works then there is a good chance
that the problem lies with the 13Amp fuse in the heater plug. If either fuse or socket is
suspected, have them checked by an electrician.
4. I Have a problem that is different to those in the previous examples
1- 4.
Below is a list of Useful Telephone numbers
For general advice about your stove:
VALOR FIRES TECHNICAL HELPLINE 08706 061 065.
To report faults or arrange for your stove to be serviced:
VALOR FIRES SERVICE 08706 090 081.
For sales or product information:
VALOR FIRES SALES 08706 061 067.
CALLERS IN THE REPUBLIC OF IRELAND
Call 0044 8706 061 065
Page 9
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2007.
