3. OPTIONAL SPACER FRAME KIT
The following kit is obtainable either from your heater supplier or direct from Valor
Fires Sales.
Spacer frame kit 0582631.
4. FITTING THE HEATER
Important: Before continuing with the installation of this heater please ensure
that you have completed the information on the last page of this guide.
Please read this section thoroughly before positioning the heater.
Do I need any tools?
Depending upon the chosen method of installation you may need the following tools: -
For Spacer frame or screw fixed installations you will need a
Pozidrive / Phillips
/ cross head screwdriver
. This should have a number 2 size tip.
If wire fixing and drilling into brickwork you will need a power drill (preferably with
hammer action) and appropriate size drill bit for the wall plugs supplied.
Where and how can you fit the heater?
Q
Can the heater be installed into a ‘hole in the wall’ (elevated opening)?
A
We do not recommend the heater for this type of installation.
Q
Do you want to fit the heater into a surround or fireplace opening without
the optional spacer frame?
A
The minimum rebate / depth required is 70mm.
INSTALLER AND OWNER GUIDE
Page 6
©
Baxi Heating U.K. Limited 2010.
Contents
Quantity
(Illustrations are not to scale)
80mm deep
spacer frame
1
No 8 x 3/8 Self-
tapping screws
4
Figure 1.