Fitting the fascia.
Important: Before fitting the
fascia ensure that you have
completed the information
on the last page of this
guide.
Place the loose pebbles
onto the fuel support. It is not
necessary to use all the
pebbles supplied.
Locate the top of the
fascia behind the top flange
of the heater.
The fascia is secured
using the two M5 x 25mm
screws with bright metal
finish. These are located as
in figure 3.
On Visia and Glamour
models the glass panel that
forms part of the fascia is
supplied separately. Locate
the glass panel hanging
hooks into the slots in the
heater body (See figure 4).
Page 9
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2008.
Figure 4.
Figure 3. Underside of heater (Shown with Glamour
facia)