Valor Fires 831 Installer And Owner Manual Download Page 5

Always

 

Always

install the heater in accordance with this guide. If in doubt obtain 

expert advice.

 

Always

make sure the electrical socket is accessible and located adjacent to, but 

not above or behind the heater.

 

Always 

disconnect the heater from the electrical supply before carrying out 

cleaning, maintenance or replacing the lamps.

 

Always

make sure the heater is firmly secured to the wall.

 

Always 

use a fireguard when young children, infirm persons and pet animals can 

come into contact with the heater.

 

Always 

use genuine Valor Fires spares.

Never

 

Never

leave children unsupervised in a room where the heater is ON and 

unguarded.

 

Never

obstruct or cover the fan outlet or force items into heater openings.

 

Never

install or use the heater anywhere where water is in use, i.e.

Bathrooms, Kitchens, Shower Rooms, Swimming Pools etc.

 

Never

use aerosols or steam cleaners on or around the heater.

 

Never

route the electric cable under carpet etc.

 

Never

install the heater close to curtains or combustible materials.

 

Never

use the heater to dry clothes etc.

 

Never 

sit or stand on the heater.

 

Never 

fit a shelf or position soft furnishings such as curtains above the heater.

Never 

use the heater with a timer switch or similar device.

Important Electrical Safety

The heater must 

not

be located in front of or under an electrical socket, the socket

must always be accessible in order to disconnect the heater from the electrical supply
for maintenance and cleaning.

CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut
out, this appliance must 

not

be supplied through an external switching device, such

as a timer, or connected to a circuit that is regularly switched on and off by the utility.

Important! This heater must be earthed.

 

The heater is supplied with a 3 pin 13 Amp fused re-wireable plug with 1mm² 3

core cable.

 

The wires in the cable are coloured in accordance with the following code: -

Live =Brown
Neutral = Blue
Earth = Green /Yellow

 

The electric supply must be safely routed from the heater to an electrical socket.

Page 5

INSTALLER AND OWNER GUIDE

© 

Baxi Heating U.K. Limited 2008.

Summary of Contents for 831

















Reviews: