Fitting the light diffuser.
1.
There is a light diffuser supplied with the
firefront (See figure 10). Place this on to the
metal flange below the plastic screen.
Fitting the Fascia.
1.
The magnets may have moved in transit.
Locate the magnets as in figure 11.
2.
Fit the fascia to the firefront by hooking
the brackets on the rear of the fascia over
the brackets on the firefront. Be careful to
keep the magnets at the bottom of the fascia
away from the firefront until the hooks are in
place (See figure 11). Then allow the fascia
magnets to secure the bottom of the fascia
to the firefront.
3.
Hook the lower firefront casting on to the
firefront as in figure 12. Secure in place using
the decorative knob (See figure 13).
4.
Place the one piece coal bed onto the top of
the fuel support.
Page 16
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2010.
Figure 13.
Figure 12. Firefront location
Figure 11. Fitting the facia.
Figure 10. Diffuser location
