Securing the Firefront.
All fixings supplied with the firefront have been identified in figure 2.
The firefront must be secured into position to prevent it from being tipped over.
The following securing options are available:
Method A
- Securing with wire.
Method B
- Securing with wire using an
Optional Spacer Frame kit
(See
section 4).
If fitting the firefront onto a decorative hearth surface such as marble or tile it is
advisable to protect the hearth surface. Do not drag the firefront as the surface finish
may be damaged.
Method A - Securing with wire.
1.
Supplied with the firefront is a spacer frame.
The opening for the Boiler Control should be on
the right hand side when fitting.
2.
Secure the spacer frame to the firefront using
four No.8 x 3/8 screws supplied (See figure 6 & 2).
3.
Insert the Boiler Control lead through the
opening in the spacer frame, then ensuring that
the display is at the top, gently push the Boiler
Control into place. The control will ‘click’ into place
See figure 7. Place the firefront in front of the
boiler, connect the Boiler Control lead to the lead
on the boiler and check the boiler operation.
4.
Supplied with the firefront is a wire. This will be
used to secure the firefront to the top of the boiler.
Page 13
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2010.
Figure 7. Fitting the Boiler Control.
Figure 6. Fitting the spacer
frame to the firefront
