Method C - Spacer Frame.
The spacer frame is for use during
installations where a chimney recess or
rebated fire surround are not available.
For your safety the frame and heater
must be securely fixed to the rear wall.
1.
Position the spacer frame against the
wall. Ensure that the spacer frame is
central to the fireplace.
2.
The top rear flange of the spacer
frame has two screw locations. Mark the
positions of the two screw locations on
the rear wall (See figure 6).
3.
Remove the spacer frame from the
fireplace and place away from the work
area.
4.
Drill the screw locations using a
suitably sized masonry drill bit for the
wall lugs supplied.
5.
Insert the two wall plugs provided into
the holes
6.
Insert a wood screw into each hole
and screw in until there is approximately
6mm of screw protruding from the wall.
Page 10
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2010.
Figure 6. Bracket positions
Figure 5. Steel wire fixing (The fuel effect
may differ from that shown)
