Valon Technology 5009 Operations Manual – Version 1.36
Page 7
switches to select preset frequencies. In SWEEP mode the USER PORT has sweep trigger and
sweep enable signals preset.
1.3
Electrical Specifications
Note: The 5009 is
NOT
USB powered See Valon
PS6V-1
power supply kit.
DC Input
Input Voltage Range
Absolute Max
Operational Max
Operational Min
Reduced performance
Min non-operational
+16V to -16V (reverse protected)
+8v
+6V Recommended Operation Voltage
+4.8 to 5.8V (output power reduced)
+3.5V (synthesizer remains locked and serial port ok)
>10V for >10sec resets the synthesizer to factory default settings
Input Current
Source 1 and Source 2 on
Source 1 or Source 2 on
Source and Source 2 off
560mA Output Enabled
330m Output disabled
190mA Output disabled
270mA Output enable
30mA both disabled
DC Input Connector
Hirose DF3A-2P-2DS
Mates with Hirose DF3-2S-2C plug and pre-crimped wire H2BXT-10112-R4
(red) and H2BXT-10112-B4 (black). 20” dc cables supplied with synthesizer,
additional cables available.
Full performance is obtained when the dc input voltage is in the operational range. If the input
voltage is increased above the operational range, the output will be disabled and the synthesizer
will be in standby mode. The synthesizer may be operated with reduced RF output power in
the reduced performance voltage range. If the dc voltage is in the Min non-operational range,
the output will be disabled but all user setting will be retained. Input voltages below the
minimum non-operational range will cause a reset condition.
RF Synthesizer Specifications
(Unless otherwise noted, all specifications apply equally to both synthesizers.)
Frequency Range
Max
Min
6000MHz
23.5MHz
Frequency Increment (Fractional-
N Mode)
Frequency Range (MHz)
3000~6000
1500~3000
750~1500
375~750
187.5~375
93.75~187.5
46.875~93.75
23.4375~46.875
20MHz reference
Reference Doubler ON
10 kHz
5 kHz
2.5 kHz
1.25 kHz
1 kHz
500 Hz
250 Hz
100 Hz
(minimum step size)
20MHz reference
Reference Doubler OFF
5 kHz
2.5 kHz
1.25 kHz
1 kHz
500 Hz
250 Hz
100 Hz
50 Hz
(minimum step size)
