Page 4
Chapter I Safety Precautions
1-1 Safety attentions
1.
The following are the four basic rules for safety operation which must be followed by operators:
(1) Only trained personnel can operate or repair this machine.
(2) The operation manual must be read carefully and make sure its content is well understood.
(3) Please keep the operation manual near the machine for convenient review.
(4) Both the operator and service personnel shall be aware of the position of the emergency
switch and its functions and operation method.
2.
Attentions before and after the machine starts:
Please confirm first if all the buttons on the control panel are turned off, and if the earthing wire is
correctly connected.
AC power
The power of this machine is single-phase 220V. The rated current of the external power cut-off device is
20 ampere and shall conform to safety standard.
3.
Attentions for transportation and installation:
To increase the efficiency of this machine, the place where it is installed shall be well ventilated, with
good air quality and ambient temperature no higher than 40 degrees.
The machine shall be away from rain or direct sunshine.
The followingare attentions for transportation and installation
(1) Please confirm that the ground is strong enough to support the machine.
(2) In case of transportation by crane, only one person is allowed to operate.
(3) In case of transportation by crane, no one is allowed to stand under or near the machine.
(4) During transportation, installation or cleaning process, safety helmet is a must to protect
your head.
(5) If one must climb the machine, please use safe and solid ladder or platform.
(6) Please use proper hoisting equipment to lift heavy items.
(7) Please confirm the sling is strong enough to lift the machine or item.
(8) Before transportation or installation, please turn off the power and let others know the
location of the emergency switch in advance.
(9) Please wear leather gloves or similar protective device in transportation, installation or
cleaning process.
4.
Attentions in operation:
During operation, non-operators are not allowed to come near the control panel. The operator
must be familiar with the functions and operation methods of the control panel.
The followingare attentions in operation
(1) Do not remove any safety shield and safety measures.
(2) Do not remove or change the position of interlocking mechanism.
(3) Do not touch the switch with wet hand.
(4) Do not put any part of your body on or near the moving parts of the machine.
(5) Please make sure your hair is away from the moving parts of the machine.
(6) Do not wear bracelet, watch, jewelry or baggy clothes.
(7) In principle, this machine can only be operated by one person. If more operators are needed,
there must be good communication among operators.
5.
Attentions for maintenance and repair:
