45
CAUTION
:The green image drum surface at the base of the ID unit is very delicate and light
sensitive.
Do not touch it and do not expose it to normal room light for more than 5 minutes. If thedrum
unit needs to be out of the printer for longer than this, please wrap the cartridge insidea black
plastic bag to keep it away from light. Never expose the drum to direct sunlight or verybright
room lighting.
5.With the coloured toner release lever (1) to the right, pull the lever towards you.
This will release the bond between the toner cartridge and the image drum unit.
6.Lift the right-hand end of the toner cartridge (1) and then draw the cartridge to the right to release
theleft-hand end as shown(2), and withdraw the toner cartridge out of the image drum cartridge.
Please thecartridge on a piece of paper to avoid marking your furniture.
7. Take the new image drum cartridge out of its packaging and place it on the piece of paper where
the oldcartridge was placed. Keep it the same way round as the old unit. Pack the old cartridge inside
the packaging material for disposal.
8. Place the toner cartridge onto the new image drum cartridge as shown. Push the left end in first,
and thenlower the right end in. (It is not necessary to fit a new toner cartridge at this time unless the
remaining toner level is very low.)
