3
© Vallox Oy - All rights reserved
MANU
AL
1
2
4
min. 500 mm /
650 mm
3
Electrical connection
CAUTION
The minimum distance of the
bottom edge of the grease
filter to an electric cooker is
500 mm, and to a gas cooker
650 mm.
CAUTION
• The cooker hood must
not be connected to a flue
that is used for removing
combustion gases (e.g.
from a wood- or gas-
burning fireplace, cooker,
or stove).
• The cooker hood must
not be fastened through
the side panels to the
cabinets.
• Fans that are controlled
through the cooker hood
must have an engine
cover and their maximum
power must not exceed
340 W.
• Regulations on leading
extraction air outdoors
must be observed.
POWER PLUG
G23 LED
INSTALLATION
Use the mounting accessories included in the package
to fasten the cooker hood in place.
1. Shorten the extract air duct to be connected to the
hood (125 mm spiral duct) to the correct length.
2. Where required, install a Vallox cover strip, for
instance, (2142400 cover strip 500 or 2142500
cover strip 600) to cover the opening in the rear
wall.
3. Lift the hood so that it is in contact with the duct.
4. Fasten the cooker hood with the mounting
brackets or by other means, so that the hood is
firmly in place and cannot move (figures 1, 2 and
3). The mounting screws included in the accessory
bag are suited to walls made of wood, chipboard,
cement or stone. Use appropriate mounting
devices for other materials.
5. Check the tightness of the extract air duct system.
6. Plug the cooker hood into the mains. Ensure that
the plug can be unplugged, where required.
