Vallox A3609, Manual

Page: 7 / 24

7
© Vallox Oy - All rights reserved
a
a
!
INSTALLATION SITE
The Vallox ventilation unit must be installed in a location
where the temperature remains above +10°C. When the unit is
installed without a protective enclosure, the location must be
chosen so that its noise does not cause any disturbance (e.g.
storage premises, technical spaces, and false ceilings).
Vallox TSK Multi 50 MV and Vallox TSK Multi 80 MV must
be mounted on the ceiling. Use the mounting hooks (4 pcs)
delivered with the unit to mount the ventilation unit on the ceiling.
Observe the weight of the unit (45 kg / 58.5 kg) when mounting.
IMPORTANT
The unit must be installed straight so that the
condensing water that collects in the bottom pool drains
through the condensing water outlet.
NOTE
Reserve a space equal to the depth of the unit in front of
the unit for servicing purposes.
The service space in front of Vallox TSK Multi 50 MV
must be at least 530 mm.
The service space in front of Vallox TSK Multi 80 MV
must be at least 600 mm.
NOTE
The whole length of the outdoor air duct to the unit and
exhaust air duct from the unit must be insulated using
closed cell insulation.
REMOVAL OF CONDENSING WATER
The unit is delivered with a siphon that has an air lock and a
more compact elbow. When the elbow is used, an air lock must
be installed somewhere else between the extraction pipes (the
parts needed are included in the accessory bag). The air lock
ensures the removal of condensing water and muffles any noise.
MEASURING AND ADJUSTING THE AIR
FLOWS OF THE VENTILATION UNIT
The accessories delivered with the unit include four (4) air flow
measuring tubes. These can be inserted in the ducts to allow
for easier ventilation adjustment.
92
1
Ø6
1 6
WARNING
Water must at all times
be kept out of the
electrical system.
INSTALLATION
INS
TALLA
TION