21
© Vallox • We reserve the right to make changes without prior notice
VENTILATION PROFILES
USING THE UNIT
4. The first information screen for the profile appears. This screen
contains the following information:
•
Duration
— This value indicates the enhanced ventilation
duration when the
Fireplace function
is activated. The value
is expressed in hours and minutes.
•
Supply fan speed
— This value indicates the percentage of
the supply air fan speed in relation to the maximum speed.
•
Extract fan speed
— This value indicates the percentage of
the extract air fan speed in relation to the maximum speed.
MODIFYING THE PROFILE SETTINGS
IMPORTANT
The system uses, but does not save the settings automatically.
Your settings may be lost during, for example, a power outage.
Remember to save your settings by selecting Expert settings >
Save and restore settings.
MODIFYING THE AT HOME PROFILE SETTINGS
1. Open the
At home
profile main view.
2. Press the
Profile information
button.
3. Press the
Edit
button.
4. The fan speed setup screen is opened.
5. Set the
At home
profile fan speed as a percentage of the
maximum by using the
Plus
and
Minus
buttons.
6. Press the
Right arrow
button.
7. The temperature setup screen is opened.
8. Set the desired supply air temperature for the
At home
profile by using the
Plus
and
Minus
buttons. You can adjust
the temperature in the range of +10°C — +25°C. The
recommended temperature is +15°C or 2—3°C below the
room temperature.
9. Press the
Right arrow
button.
10. The setup screen for the automatic fan speed control, based
on the relative humidity, appears.
11. Use the
Plus
and
Minus
buttons to select whether the
automatic fan speed control, based on the relative humidity,
is used or not.
12. Press the
Right arrow
button.
13. The setup screen for the automatic fan speed control, based
on the carbon dioxide content, appears.
14. Use the
Plus
and
Minus
buttons to select whether the
automatic fan speed control, based on the carbon dioxide
content, is used or not.
15. Press the
OK
button.
