Valleylab RapidVac, User Manual, Page: 21 / 50

Rear Panel
Controls, Indicators, and
Recept
acles
RapidVac™ Smoke Evacuator User’s Guide 2 - 5
Rear Panel
Power Cord Receptacle/Fuse Tray
The cord receptacle provides power to the smoke evacuator using a removable
cord appropriate for regional power supplies. Cord can be wound on the cord
brackets to store with the smoke evacuator.
Two 10 AMP fuses in the 110V model (8 AMP for 220V) are located in a
removable tray adjacent to the cord receptacle. Fuses electrically protect the
system from damage and the operator from injury. If the system is overheated or if
there is an electrical surge in the electrical system, fuses will open and the system
will not operate. To re-start the system, unplug the power cord and replace the
fuses.
250V, T10.0A-(100-120V)
250V, T8.0A-(220-240V)
Remote
Activator
1 Cord brackets
2 Carrying handle
3 Power-cord receptacle/fuse tray
4 Remote Activator jack
5 EPROM jack
6 Equipotential grounding lug