Returning the Force 2 Generator
7-2
Force 2 Service Manual
Returning the Force 2 Generator
Package the generator in the original packaging container, if available. If
the original packaging is not available, use the following guidelines for
packaging:
• Remove and retain the footswitch.
• Use a packing container with double wall construction.
• Place a plastic bag over the generator.
• Use nonabrasive packing material that will not damage the surface of
the unit.
• Use four crossed straps to secure the box.
Returning Circuit Boards and Other Subassemblies
When packaging circuit boards or other subassemblies, use the following
guidelines:
• Place each board or subassembly in an ESD (Electrostatic Discharge)
bag or container.
• Provide a separate packing container for each board or subassembly.
Summary of Contents for Force 2-2 PCH
