background image

12

Safety

Operate Safely

Valley Irrigation machines are designed with safety in mind. However, if this machine is operated incorrectly, 
it may pose a safety threat to the operator. A good safety program is much like a chain, it is only as strong 
as its weakest link. The manufacturer, dealer, and operator must maintain and improve all safety programs.  
Following is a list of safety operating tips which you and all other persons servicing or operating the machine 
must read and understand:

!

 

CAUTION

•  DO NOT operate this machine without first 

reading the Owner’s Manuals for the machine.

•  Read all safety messages in this manual and 

safety signs on the machine.

•  DO NOT let anyone operate this machine with-

out proper instructions.

•  Unauthorized modifications may impair the 

function and/or safety of the machine.

•  If you do not understand any part of this manu-

al, contact your Valley dealer.

EMPLOYEE INSTRUCTION ON SAFETY

It is very important to instruct your employees on the 
safe use of this equipment at the time of their initial 
assignment to operate it. DO NOT let anyone operate 
this equipment without proper instructions.
Safety training should be presented annually and 
the service manager should ensure employees fully 
understand the safety messages and what to do in 
case of emergencies.

EMERGENCY STOPPING

The machine can be stopped at any time at any tower 
by turning the disconnect switch, located underneath 
the tower box, to the OFF position. See Figure 12-1.

!

 

DANGER

DISCONNECT POWER WHEN SERVICING
ALWAYS

 disconnect electrical power before 

servicing or performing maintenance to the machine.
If you are going to perform maintenance on the 
machine, 

YOU MUST

 shut off and lock the main 

power disconnect as shown below. See Figure 12-2.

The blue (OSHA safety color code) tag shown 
below should also be filled out and attached to the 
disconnect after locking. See Figure 12-3.
The tag should reveal the name of a person to contact 
before restoring power to the machine.

1

Figure 12-1 1. Disconnect Switch

1

2

Figure 12-2 1. Main Power Disconnect

2. Lock

BACK

DANGER

DO NOT

OPERATE

  _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 

SIGNED BY:

  _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 

DATE:

0992009

FRONT

DANGER

  _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 

  _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 

  _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 

  _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 

DO NOT REMOVE

THIS TAG

REMARKS:

SEE OTHER SIDE

  _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 

Figure 12-3

Summary of Contents for Vflex







































Reviews: