Part# 850200130
14
To begin programming, open the table’s DBA Coin door and locate
button ―S2‖ on the main PCB
To go into program mode hold down the S2 switch as the display counts down
from 5, release after your display shows
After entering program mode, most of
your programming will be done using
the buttons mounted on the coin door.
Use the
Start
button (top) to enter a
program group or increase the
option.
Use the
Speed Pool
button (bottom)
to decrease the option.
Use the
Select
button (middle) to
navigate to the next option.
When the ―No‖ option is selected on any
―Yes/No‖ choice, the program skips
forward to the next Sub Group or program
group.
