background image

HAVING TROUBLE? CALL THE SUPPORT TEAM AT: 800.864.1649

5

SAFETY INFORMATION

• The user, through their own analysis and 

testing, is solely responsible for making 

the final selection of all components, while 

assuring that performance, maintenance, 

safety, and warning requirements are met. 

 

 

 

• Read all following safety instructions carefully 

before attempting to install, operate or 

maintain these hose reels. Only qualified 

individuals should install and commission 

these hose reels. Failure to follow instructions 

could result in hose reels to perform 

improperly along with personal injury or 

property damage. 

• User should assess and determine if any 

additional safety measures are required for 

particular application and operation, while 

fully instructing on those safety measures. 

• Follow good maintenance practices by 

establishing a process of inspection, testing 

and replacement of hose reel components 

based off continuous use. 

• Only properly trained individuals should 

inspect, test or service hose reels. Periodic 

updating of training is recommended. 

• Modification of the hose reel may cause 

increase wear caused by improper 

maintenance may void warranty.

1. Pressure Warnings:

• This hose reel should be properly installed 

before use in accordance with local codes and 

ordinances.

• The pressure from within the hose reel should 

be released before any service functions are 

performed.

• This hose reel must not be used for pressure 

greater than the rating.

2. Operational Warnings: 

• Exercise care when handling the hose reel during 

normal operation.

• Do not use hose different from that for which the 

reel is intended.

• Changes in diameter, weight per foot, length of 

hose or flexibility (Minimum Bend Radius) will 

affect the operation of the reel.

• Mounting hardware and fasteners should be 

installed to maintain tightness under vibration and 

checked periodically to ensure tightness.

• Overhead installation mountings should be such 

that the reel is not supported by bolts in tension. 

A safety chain, cable, enclosure, or netting is 

strongly recommended to minimize damage and/

or possible injury in the event of a mounting 

failure.

3. Pressure & Temperature Rating:

• All reels covered in this manual have specific 

P.S.I. ratings. Reels should not be used at 

pressures greater than the rating of the hose.

• Operational temperature ranges vary across the 

wide range of hose options. Hose reels should not 

be used at pressure greater that the rating of the 

hose reel or other components.  

      WARNING: USER RESPONSIBILITY

 

       WARNING: SAFETY

 

Summary of Contents for MHR-M









Reviews: