1.
Remove all parts and accessories from parts box and check against the enclosed list.
2.
Turn the table upside down, taking care not to scratch the top (assemble on carpet or
cardboard).
3.
The legs may be assembled in two positions depending on the holes used. Installing
them to the higher position places the table at regulation height. The lower position
makes it easier for children to enjoy the game.
4.
Using two people set the table upright and wipe it off with a damp cloth.
5.
Thread the appropriate rods through the corresponding bearing hole (be careful,
there are four 3-holed rods and the two shortest of these four rods are the goalie
rods). Thread the rod through one side of the cabinet and wipe a thin coating of
silicone on the rod using a cloth or paper towel. Thread one black rubber bumper
onto the rod (make sure that the side of the bumper with the holes always faces the
cabinet wall).
6.
Thread the appropriate number of men onto each rod (smiling face of black men
facing yellow goal and smiling face of yellow men facing black goal), followed by
another rubber bumper on the far end. Slide the end of the rod into the bearing hole
in the opposite cabinet wall.
Summary of Contents for Tornado Sport
Page 3: ......