Remove the four bolts from each side of the Air Hockey
table. Assemble one Inner Mounting
Bracket and Outer Mounting Bracket to the Coin Door Side of the table. The bolts attaching the Inner
Bracket should be tight at this time, whereas the Outer Bracket Bolts should be kept loose at this time.
Using two or more people, insert the Overhead Scoring Assembly tube into the Bracket assembly on
the Coin Door Side.
While one person is holding the tube in place, access the harness from inside the table, through the
Trap Door, carefully pull the table harness back to the inside of the table.
Feed the wires from the tubes through the Inner Mounting bracket as shown below. With one
individual below the table, work the harness to the inside of the table making all connections from the
inside. Once the connection are made assemble the tube to the table using the Inner and Outer
Mounting bracket.
Replace the Trap door if you have not already done so.
