Vallen spotWave 201, Instruction Manual

Page: 18 / 50

2022-07 file: spotwave_instructions_manual.docx 18 of 50
13.3. Sensor Connector (in)
The SMA socket labelled Sensor is used to connect an AE sensor to it.
Property Description
Connector type SMA (IP67), female
Input impedance 16 kΩ || 12 pF (±50 mV, ±100 mV input range); 500 k Ω || 940 pF ( ±5000 mV
input range)
Input range
(
*
)
94 dB
AE
, (±50 mV), 100 dB
AE
, (±100 mV) 134 dB
AE
, (±5000 mV)
(
*
)
The input range is defined by hardware and marked on the device
13.4. CCT Connector (out)
The CCT connector (Coupling Check Transducer) is used to connect a coupling check transducer to the
spotWave device.
Property Description
Connector type SMA (IP67), female
Output range 3.3 V, 20 mA