09-2018
file: ISAFE3-OperationManual_EN_DE.R4.VEXH.docx
35 of 58
Vallen ISAFE3 Operation Manual - Operation Manual
Figure 8-5
Figure 8-5 shows the heat shrink of
Figure 8-4 shrunk onto the cable and
partly onto the SMA connector.
Figure 8-6
Figure 8-6 shows a 60 mm long
section of heat shrink type RW200-E,
12.7 mm inner diameter before
shrinking.
The shown stainless steel screwed-
clamps are for sealing both heat
shrinks on the coaxial cable.
The smaller one is to clamp both
layers of heat shrink onto the cable,
the bigger one is to clamp one heat
shrink layer onto the connector
adapter of ISAS3.
Figure 8-7
As seen in Figure 8-7, first the smaller
clamp and then the larger clamp and
then the heat shrink must be shifted
over the cable end before the SMA
connector is screwed on.
Figure 8-8
shows the heat shrink
already shrunk over the connector-
adapter on ISAS3 side.
