OMNIA
24
5.5
TROLLEY ASSEMBLY
•
Please refer to assembly sheet attached.
5.6
PARTS ASSEMBLY
Proceed as described below for the coupling of the machine and the loader.
•
Position the machine in the designated location taking into account, in addition to the overall dimensions of the
machine, the loader, the unloader and the unloading trolley, also any spaces for maintenance (see par. 13).
•
Raise or lower the feet of the machine in order to ensure a level work surface.
•
Screw in and tighten the foot lock nut.
Figure 5-11
•
Remove the 6 screws indicated to free the operator side cover strip and the drive shaft protector.
Figure 5-12
•
Remove the 5 screws indicated to free the panel side cover strip and the drive shaft protector.
Figure 5-13
•
Remove the drive shaft protection plate and the loader fixing screws.
Screwing in the foot will
lower the machine
Unscrewing the foot will
raise the machine
Tighten the lock nut after
adjustment
Summary of Contents for OMNIA
Page 1: ...OMNIA Instruction and Maintenance Manual...
Page 2: ......
Page 65: ......
Page 66: ...002695 rev 02...
