pg. 3
5.
Attach mounting hardware to
cargo rail.
a.
Slide remaining T-Nut
into middle of rail.
Flat side of T-Nut
should face outward.
This will be used
later.
b.
Slide bracket
assemblies from step
3 into front and rear
ends of rail. Loosely
Tighten bolts so
brackets can still
move freely.
6.
Place Panel in Truck. Panel should sit flush
to brackets. Align holes in bottom of panel
to holes in storage box frame. Once
aligned, thread Torx bolts through panel
and into storage box frame. Leave bolts
loose.
7.
Bolt MAPS Panel to brackets front and rear using 1/4-20 screws and washers. Tighten bolts to
remove play, but still allow easy adjustment.
