5
Chapter 4 – Optional Equipment
Available Options
Listed below are the options available for use with the Alpha 4314 Series Digital Igniter Testers.
Option A: Battery Charger
Option "A" is an AC/DC converter that converts 115VAC line voltage to 6VDC at 300mA. One charger is
provided as a standard accessory with every Alpha 4314.
Replacement Batteries
The rechargeable NiMH batteries installed in the Alpha 4314 should provide years of trouble-free
operation. Replacement, however, will eventually be necessary. The Alpha 4314 uses four 1.2V cells
installed in a reusable battery box. The batteries are held in place by reusable tie-wraps. When ordering
replacement batteries, please specify Valhalla Stock #05-10117, quantity four (4).
Option CC4: Carrying Case
Option "CC4" is a meter and accessory carrying case with extra room for test leads, battery charger, etc.
Option R4: Rack Mount Adapter
Option "R4" is an adapter tray that allows the Alpha 4314 to be installed in a standard 19" equipment
rack.
Test Leads
Option K: 4-Wire Kelvin Lead Set
Option "K" is the recommended general purpose lead set for all Valhalla Ohmmeters. Option K is a
shielded 48" lead set terminating in ½ inch gold plated clips.
Option MP-S: Single Probe Lead Set
Option "MP-S" is a 4-wire lead set terminated in single points. The 4-wire configuration is maintained up
to the point of the probe, eliminating most cable resistance effects. Option MP-S may be used where a
single probe tip is a must.
Option MP-1: Kelvin Micro-Probes
Option "MP-1" is a 48" shielded lead set (dual banana), handheld pencil type, terminated in spring loaded
steel tips with .05" separation (1 amp max.). Special orders or modified versions available upon request.
Option MP-2: Kelvin Mini-Probes
Option "MP- 2" is a 48"shielded lead set, handheld pencil type, terminated in spring loaded steel tips with
0.18" separation. (1 Amp max.)
