- 19 -
PROBLEMS, CAUSES AND SOLUTIONS
PROBLEM
CAUSE
SOLUTION
The power tool
does not turn
on
The power cord is
disconnected
Check the power
cord
The power cord is
not plugged in
Plug the power
cord in and press
the ON button
The switch is in
the OFF position
Press the switch
to the ON position
W o r n m o t o r
brushes (not vi-
sible from outside
the tool)
Consult an au-
thorised service
centre
Electrical fault
Consult an au-
thorised service
centre
The tool cuts
very little and
badly
Blade is damaged
or is not sharp
Replace the blade
The blade is not
the right one for
the workpiece
Replace the blade
Blade speed and/
or pendulum ac-
tion are not the
right ones for the
workpiece
Make the neces-
sary adjustments
(2 – 15 where
fitted)
The power tool
vibrates a lot
Blade is damaged
or is not sharp
Replace the blade
Blade is mounted
incorrectly
Remove the blade,
clean the compo-
nents and replace
following the in-
structions
The workpiece is
not secured to the
workbench very
well
I m p r o v e t h e
clamping of the
workpiece
IMPORTANT! If the power tool still fails to
operate correctly after you have carried out
the above operations, or in the event of ano-
malies other than those described above, take
it to an authorised service centre with proof
of purchase and ask for original spare parts.
Always refer to the information shown on the
technical specifications label.
STORAGE
Clean the tool and all its accessories thoroughly
(see Maintenance section). Protect the unpainted
parts with protective oil and use the original
packaging or case (where fitted) to protect it.
Keep the tool out of reach of children, in a stable
and safe position. The place must be dry, free
from dust, temperate and protected from direct
sunlight.
Keep children and unauthorised personnel out
of the storage room.
DISPOSAL
In order to protect the environment, proceed
according to the local laws in force. Contact the
relevant authorities for more information.
When the machine is no longer usable or repai-
rable, take the machine and its packaging to a
recycling centre.
Take out the batteries (where fitted) and dispose
of them separately.
Electric and electronic waste may contain poten-
tially hazardous substances for the environment
and human health. They should therefore not be
disposed of with domestic waste, but by means
of differentiated collection at specific centres or
returned to the vendor in the event of purchasing
new equipment of the same type. Illegal disposal
of waste will result in administrative sanctions.
WARRANTY
The product is protected by law against all non-
conformities with regard to its stated characte-
ristics, provided that it has been used solely in
the way described in this user’s instructions, it
has not been tampered with in any way, it has
been stored correctly, it has been repaired by
authorised personnel and, where necessary, only
original spare parts have been used.
In the event of industrial or professional use
or similar, the warranty is valid for 12 months.
To issue a request for intervention covered by
warranty, proof of purchase must be shown to
the retailer or authorised service centre.
